How to take good care of your sex doll

 1.The doll material is refined from a novel polymer material TPE, also known internationally as Cyberskin (virtual skin). The material used for this type of sex dolls is non-toxic and tasteless, the hardness is below Shore A0 and the tensile strength is more than six times. It has the smoothness, fineness, softness and elasticity of real human skin. The materials comply with the relevant safety standards of the state and are not harmful to the human body or the environment.

Zazou-170cmè¶ © 偶

2.Dolls cannot scratch the surface of the model with sharp tools and cannot knead hard to avoid damage to the surface skin. Otherwise, the life and beauty of the sex doll will be impaired.

3.The doll has different metal joints in the body, which can play different postures within a certain area. It is used to fix the inner bone joints during production. There are screw mounting holes on the soles of the feet and calves and there are slight signs of changes after treatment.

Shirin-165CMç © ¶¶ © 偶

4.The posture of the doll is straight in the factory. Do not let the doll be placed in a difficult bending position for a long time to avoid deformation and damage to a certain part due to long-term pulling.

5.Do not leave the doll exposed to direct sunlight for a long time, so as not to cause material aging and affect the service life.

6.Avoid easy-to-fade clothing or poor dyeing techniques to avoid soiling the model. The dolls dyed due to clothing are difficult to wash. Please be careful here.

7.It cannot be assembled with ink-containing materials such as newspapers and magazines. Avoid dark clothing or leather fabrics with oil-soluble pigments to avoid contamination of the doll.

8.If there are indentations or strangulation on the surface of the doll due to prolonged squeezing, moisten it with water with a clean and non-marking white cloth, then blow it against the surface of the fabric with a hot air blower. After a certain time, the depression disappears.

9.If the surface of the doll shows a small area damage, it can be glued with the supplied glue. The damaged surface is first cleaned, and then an adhesive layer is applied evenly to the two cutting surfaces, and then the two cutting surfaces are glued. Apply a thin layer of glue to the surface together and wait about half an hour for the glue to dry. If you have other technical problems, you can contact the seller or manufacturer directly. The manufacturer usually provides the appropriate processing technology.

10.After a long display time, the surface of the doll has dust and dirt, which can be cleaned with a general detergent such as washing powder. For stubborn stains, use dry cleaning powder dipped in a small amount of water to scrub it directly, which is easier to remove. However, avoid scratching the surface of the doll with your fingernails. After washing, wait for the surface moisture to dry and apply the contact powder (or ordinary prickly heat powder) evenly to the surface. After washing, the surface is as smooth as before and the hand feels good. Suggestion: Regular cleaning and maintenance should be carried out depending on the situation.